Analog Modular System Base System in LC9 suitcase with PSU3, Format: 9 HE Content of the system: 2 x standard VCO A-110, 1x Ring Modulator A-114, 1 x audio Divider A-115, 1 x VC Waveform Processor A-116, 1 x Noise /...
High End VCO II / VCLFO Switchable between LFO and VCO modes, Extremely precise with extremely wide frequency range and almost perfect waveforms, Width: 14 HP, Depth: 55 mm, Power requirements: +70 mA (+12 V) / -50 mA...
Analogue and Trigger Sequencer Vintage edition with black front plate, 2 Switch rows with 8 steps each, Euro rack format, Width: 50 HP, Depth: 40 mm, Power consumption: +80 mA (+12V)/ -20 mA (-12V)
Multi Type Morphing Filters Expansion module for the A100 Modular system, Width: 26TE / 131.8 mm, Depth: 40 mm (measured from the rear of the front panel), Power requirements: 200 mA (12V) / -60 mA (-12V)
Empty Housing for Eurorack Modules Integrated power supply A-100SSB (+ 12V/380 mA, -12V/380mA), 48 HP version of the A-100LC3, Built-in bus board with 8 module slots, IEC socket on the back side, Internal dimensions:...
Octal Voltage Controlled Switch Eight manual or CV controllable switches, Shared output / input (O / I) and two inputs / outputs (I / O1, I / O2) per switch, Functions of inputs and outputs are interchangeable, Two...
Sequencer Controller Module Vintage edition with black front plate, Expansion module for A-155 (Article Nr 154958 ), Different operating modes, LED display, 8 or 16 sequencer steps, Controls up to 2x A-155 (2x A-155...
Sampler / Wavetable moduleThe A-112 Module is a combined module of a voltage-controlled 8-bit sampler and a wavetable oscillator. Moreover, it is able to produce effects. It is available as a supplemental sound...
Low-Pass Filter 6 / 12 / 24 / 48 dB Module A-108 is a completely new voltage-controlled low pass / band pass filter based on the well-known transistor ladder (Moog ladder). The module has an internal 8-stage low-pass...
Spring reverb module in Eurorack format By way of spiral springs electronically recreates the reverb effect, Spring system with 3 separate springs, Reverb signal can be fed back to the input, Width: 8 HP, Depth: 50 mm,...
Dual Slew Limiter Vintage edition with black front plate, Contains two separate slew limiters, A limiter with one control for attack and release (0-10 seconds), A limiter with separate controls for attack and release,...
Voltage Controlled Clock Multiplier Multiplication factor can be controlled by control voltage or a regulator, Black front panel, Width: 4 HP, Depth: 35 mm, Power requirements: +50 mA (+12 V) / -0 mA (-12 V)
Envelope Generator Parameters can be set independently, 3-Step switch for selecting the time range, Euro rack format, Width: 8 HP, Depth: 50 mm, Power requirements: +20 mA (+12V) / -20 mA (-12V), Black front panel
Dual linear/exponential VCA The character of the control scale can be switched to linear or exponential, Can be used to process both audio and control voltages, Black front panel, Width: 8 HP, Depth: 50 mm, Power...
24 dB Low Pass 1 (VCF1)Module A-120 is a voltage-controlled 24 dB low-pass filter, which filters out the high frequency components from a sound spectrum while allowing the low frequencies to pass unhindered. The cut-off...
Mini-Case With external power adapter, Empty case suitable for up to 4 A-100 modules, Usable width 32 HP (e.g. three modules with 8HP and a module with 4HP), External dimensions (W x H x D): approx. 160 x 155 x 125 mm
Theremin Module Produces variable control voltage when hand is moved around the antenna, Range approx. 30 cm, Maximum output voltage: 10V, Euro rack format, Power requirements: 60 MA (+12 V) / 20 mA -12 V), Width: 8 HP...
24 dB Low Pass 1 (VCF1)Module A-120 is a voltage-controlled 24 dB low-pass filter, which filters out the high frequency components from a sound spectrum while allowing the low frequencies to pass unhindered. The cut-off...
Eurorack Module Voltage-controlled 24 dB low-pass filter, Cut-off frequency can be set manually or via control voltages, Two CV inputs, Power requirement: +20 mA (+12 V) / -10 mA (-12 V), Dimensions: 8 TE / 8 HP / 40.3...
24 dB Low Pass Filter SSM Based on the chip SSM2044, Width: 8 TE / 8 HP / 40.3 mm, Depth: 45 mm (measured from the rear of the front panel), Power Requirements: 30 mA (12 V) / A -20 m (-12 V)
Eurorack Module Voltage Addressed Track & Hold / Switch (Multiplexer) / Digital Outputs, Combined electronic 8-way rotary switch- with 8-fold track & hold module, Input and output indicator via LED, 8 Additional...
Envelope generator with one parameter Decay is adjustable manually or via external control voltage, Envelope output is displayed with LED control, Eurorack format, Width: 8 HP, Depth: 40 mm, Power requirements: +40 mA...
Combination of power supply and bus board With 8 slots for A-100 modules for max. Total power consumption up to 380 mA, 100-240V AC / 50-60 Hz, IEC power input on the circuit board, Safety protective cover at the...
Dual sample and hold module Vintage edition with black front plate, Designed to produce 'staircase' voltages, Consists of two separate sample / hold circuits, Eurorack format, Width: 4 HP, Depth: 30 mm, Power...
Mixer Module Mixers with logarithmic potentiometers, Primarily for mixing audio signals, Vintage edition with black front panel, Width: 8 HP, Depth: 35 mm, Current consumption: +10mA (+12V) / -10mA (-12V)
Bus Board Compatible with the Roland AIRA series (requires PSU3 power supply), Bus board (1x), Incl. 4 connection cables with flat connectors, approx. 30 cm in length
Gate / Trigger Combiner Simple, passive module that combines up to 7 gate, trigger or analog signals, Eurorack format, Width: 4 HP, Depth: 20 mm, Power Requirement: + 0mA (+ 12V) / -0mA (-12V)